Battery Charger 24VDC 15A

This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.

  • High efficiency
  • Commercial Grade
  • Lightweight
  • Quiet operation
  • Industry Proven Design – 1000s of units in operation
  • 2 or 3 stage charging (user selectable)
  • 120 VAC, 50/60 HZ (default) or 230 VAC, 50/60 Hz (internal jumper setting)
  • Voltage meter display – Ammeter and LED power status
  • For all types of Lead Acid batteries
  • Charge with a battery load or stand alone
  • Use as a power supply or DC UPS
  • UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
  • Charge 3 banks of batteries at once – no isolator necessary

MSRP: $468.30

3 in stock (can be backordered)

3 in stock (can be backordered)

SKU: SEC-2415UL

BATT/CHGR 120VAC-24VDC 15 AMP

Categories: ,

Description

This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.

  • High efficiency
  • Commercial Grade
  • Lightweight
  • Quiet operation
  • Industry Proven Design – 1000s of units in operation
  • 2 or 3 stage charging (user selectable)
  • 120 VAC, 50/60 HZ (default) or 230 VAC, 50/60 Hz (internal jumper setting)
  • Voltage meter display – Ammeter and LED power status
  • For all types of Lead Acid batteries
  • Charge with a battery load or stand alone
  • Use as a power supply or DC UPS
  • UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
  • Charge 3 banks of batteries at once – no isolator necessary

PRODUCT MANUALS & INSTRUCTIONS

Samplex_Battery_Charger_[SEC-2115UL] SEC-2415UL Owner's Manual.pdf
Samplex_Battery_Charger_[SEC-2115UL] SEC-2415UL Specification Sheet.pdf
Go to Top